Stock Request
*
Quantity Required:
Article Number:
*
E-mail Address:

Can't find a product?
*
Just ask:
*
Contact email:

Recently Viewed

Gebo - Standard portlights (circular ended)

Gebo

Gebo portlights are made from anodised aluminium and have a standard smoke grey acrylic sheet of 10mm thickness. All parts are constructed from non-corrosive materials.

Price:  £299.00
RRP:  £382.00
Save:  £83.00 (22%)
(Inc. VAT @ 20%)
+
Port size:  
Fixed/Opening:  

Article Number:  81.00.20.05


Watertight design
Unlike many designs, Gebo portlights are designed for watertight hull fitting, so there's no problem when a heeling yacht places the portlight against the pressure of fast running water.

Easy installation....and no hole drilling!
Each Gebo portlight is supplied with an aperture template to aid fitting.  There are no holes to drill as Gebo's unique clamp system provides the perfect fit. You simply apply sealant between portlight and hull, then screw the inner rim onto the back of the outer frame from the inside.  Both rim and frame are pre-drilled.  Suitable for hull thickness of 4 to 23mm.

Friction hinges
Gebo's friction hinge firmly fixes the portlight in any position without the need for stays.

Non-drip design
The smooth angled outer frame prevents water from collecting on the frame and dripping into your cabin when the portlight is opened.

All Gebo Standard portlights are CE Approved for Category A, Areas 1, 2, 3 & 4.

Gebo - Standard port lights (circular ended)

Size Style Overall size Cut-out size
Width
(X)
Height
(Y)
Radius
(R)
Width
(X 1)
Height
(Y 1)
Radius
(R 1)
1 Opening / fixed 400mm 200mm 100mm 375mm 175mm 88mm
2 Opening / fixed 508mm 324mm 126mm 483mm 229mm 114mm
3 Opening / fixed 625mm 200mm 100mm 600mm 175mm 88mm
4 Opening / fixed 825mm 200mm 100mm 800mm 175mm 88mm

CE Regulations Explained

The letters CE (Conformité Européenne) appear on many products that are traded on the single market in the European Economic Area (EEA).

The CE marking is required for many products. It:

  • shows that the manufacturer has checked that these products meet EU safety, health or environmental requirements
  • is an indicator of a product’s compliance with EU legislation
  • allows the free movement of products within the European market

By placing the CE marking on a product a manufacturer is declaring, on his sole responsibility, conformity with all of the legal requirements to achieve CE marking. The manufacturer is thus ensuring validity for that product to be sold throughout the EEA. This also applies to products made in third countries which are sold in the EEA and Turkey.

The CE Regulations apply to craft up to 24m in length that are sold in the European Union. Although the regulations may not apply to your boat, they are a useful guide for small craft throughout the world.

The regulations have Design Categories for boats based on their intended use and propulsion (sail or power). They are as follows -

A. OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4m and above and vessels largely self-sufficient.

B. OFFSHORE: Designed for offshore voyages where conditions up to and including wind force 8 and significant wave heights up to and including 4m may be experienced.

C. INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to and including wind force 6 and significant wave heights up to and including 2m may be experienced.

D. SHELTERED WATERS: Designed for voyages on small lakes rivers and canals where conditions up to and including wind force 4 and significant wave heights up to and including 0,5m may be experienced.

The Regulations divide up the boats hull and deck into four specific Areas. A product, which is suitable for fitting to an area for which it is approved, is suitable for all the areas below its category. For example, a portlight, which is approved for Area 2 may also be fitted to Areas 3 and 4, but not Area 1.

CE Area diagrams courtesy of Lewmar Hatch and Portlight fitting guide.

Be the first to Write a Review for this item!

Related products
Lewmar - Standard Portlight

Lewmar - Standard Portlight Part No. 393020200From:  £129.95  (3)

Gebo - Standard portlights (rectangular)

Gebo - Standard portlights (rectangular) Part No. 81.20.11.00From:  £169.00

Gebo - Standard Deck Hatches

Gebo - Standard Deck Hatches Part No. 80.20.10.00From:  £189.00  (1)

Gebo - 500 x 500mm (Houdini Replacement) Hatch

Gebo - 500 x 500mm (Houdini Replacement) Hatch Part No. 80.50.01.29£423.00   £289.00  (7)

Lewmar - Atlantic Portlight

Lewmar - Atlantic Portlight Part No. 39110090From:  £278.00

   
Sea Teach logo Sea Teach logo Sea Teach logo