Stock Request
*
Quantity Required:
Article Number:
*
E-mail Address:

Can't find a product?
*
Just ask:
*
Contact email:

Recently Viewed

Gebo - Standard Deck Hatches

Gebo

For over 25 years the Gebo Standard Deckhatch is the most widely used hatch in the world. This Dutch hatch is made from finest quality, seawater resistant, anodised aluminium and has a standard smoke grey acrylic panel. All parts are constructed from non-corrosive materials. A deep groove in the lower frame keeps water from coming in when the hatch is open. All sizes certified for CE Category A, Areas 2, 3 & 4.

Price:  £189.00
RRP:  £221.00
Save:  £32.00 (14%)
(Inc. VAT @ 20%)
+
Hatch cut-out:  
Flange:  

Article Number:  80.20.10.00

ARBO - Arbokol 1000 Polysulphide SealantARBO - Arbokol 1000 Polysulphide Sealant
Oceanair - SKYSHADE HatchshadesOceanair - SKYSHADE Hatchshades
  (1 Review)

Without flange
The standard deckhatch is provided without a flange for easy installation on the deck. Hatches have cut-out radii of 30mm except for the 502mm x 502mm hatch which has cut-out radii of 40mm.

With flange
For a smoother profile, the frame on our standard hatches has been extended to fit flush against the base mounting. The frame covers the base mounting screws for a smoother appearance and extra safety. Hatches have cut-out radii of 55mm.

Hatches have to be installed on a flat surface with a max. tolerance of 1mm.

The cutout size is 16mm less than the overall size. From the cutout size you can see which innerrim or mosquito screen fits to which hatch.

The standard hatch is manufactured with grey smoke acrylic. Clear, bronze and green acrylic are available to purchase by special order. Hatches with a flange and corner radius 30 can also be manufactured to order.

Gebo - Standard deckhatches

Cut-out size Overall size
Dimensions
(X 1 x Y 1)
Flange Acrylic
(Z)
Radius
(R 1)
Dimensions
(X x Y)
Radius
(R)
200 x 200mm No flange 10mm 30mm 260 x 260mm 60mm
With flange Unavailable
260 x 260mm No flange 10mm 30mm 320 x 320mm 60mm
With flange Unavailable
325 x 185mm No flange 10mm 30mm 385 x 245mm 60mm
With flange Unavailable
341 x 196mm No flange 10mm 30mm 401 x 256mm 60mm
With flange Unavailable
450 x 320mm No flange 10mm 30mm 510 x 380mm 60mm
With flange 10mm 55mm 505 x 375mm 83mm
410 x 410mm No flange 10mm 30mm 470 x 470mm 60mm
With flange Unavailable
500 x 220mm No flange 10mm 30mm 555 x 275mm 60mm
With flange Unavailable
500 x 370mm No flange 10mm 30mm 560 x 430mm 60mm
With flange 10mm 55mm 555 x 425mm 83mm
500 x 500mm No flange 10mm 30mm 560 x 560mm 60mm
With flange 10mm 55mm 555 x 555mm 83mm
620 x 620mm No flange 15mm 30mm 680 x 680mm 60mm
With flange 15mm 55mm 675 x 675mm 83mm
680 x 550mm No flange Unavailable
With flange 15mm 55mm 615 x 735mm 83mm
800 x 800mm No flange 15mm 30mm 860 x 860mm 60mm
With flange Unavailable
900 x 600mm No flange Unavailable
With flange 15mm 55mm 955 x 655mm 83mm
900 x 900mm No flange 15mm 30mm 960 x 960mm 60mm
With flange Unavailable
1,150 x 750mm No flange Unavailable
With flange 15mm 55mm 1,205 x 805mm 83mm

CE Regulations Explained

The letters CE (Conformité Européenne) appear on many products that are traded on the single market in the European Economic Area (EEA).

The CE marking is required for many products. It:

  • shows that the manufacturer has checked that these products meet EU safety, health or environmental requirements
  • is an indicator of a product’s compliance with EU legislation
  • allows the free movement of products within the European market

By placing the CE marking on a product a manufacturer is declaring, on his sole responsibility, conformity with all of the legal requirements to achieve CE marking. The manufacturer is thus ensuring validity for that product to be sold throughout the EEA. This also applies to products made in third countries which are sold in the EEA and Turkey.

The CE Regulations apply to craft up to 24m in length that are sold in the European Union. Although the regulations may not apply to your boat, they are a useful guide for small craft throughout the world.

The regulations have Design Categories for boats based on their intended use and propulsion (sail or power). They are as follows -

A. OCEAN: Designed for extended voyages where conditions may exceed wind force 8 (Beaufort scale) and significant wave heights of 4m and above and vessels largely self-sufficient.

B. OFFSHORE: Designed for offshore voyages where conditions up to and including wind force 8 and significant wave heights up to and including 4m may be experienced.

C. INSHORE: Designed for voyages in coastal waters, large bays, estuaries, lakes and rivers where conditions up to and including wind force 6 and significant wave heights up to and including 2m may be experienced.

D. SHELTERED WATERS: Designed for voyages on small lakes rivers and canals where conditions up to and including wind force 4 and significant wave heights up to and including 0,5m may be experienced.

The Regulations divide up the boats hull and deck into four specific Areas. A product, which is suitable for fitting to an area for which it is approved, is suitable for all the areas below its category. For example, a portlight, which is approved for Area 2 may also be fitted to Areas 3 and 4, but not Area 1.

CE Area diagrams courtesy of Lewmar Hatch and Portlight fitting guide.
Average Rating (1 Review):  
Write a Review and share your opinions!

Rating:  
Gebo deckhatch
Wednesday, 13 July 2016  | 

Excellent product delivered quickly and in perfect condition. Many thanks

Was this helpful to you?  Yes  /  No

This review has not been appraised.

Related products
Lewmar - Medium Profile Hatch

Lewmar - Medium Profile Hatch Part No. 39930020From:  £312.95  (1)

Gebo - Standard portlights (circular ended)

Gebo - Standard portlights (circular ended) Part No. 81.20.21.05From:  £259.00

Gebo - 500 x 500mm (Houdini Replacement) Hatch

Gebo - 500 x 500mm (Houdini Replacement) Hatch Part No. 80.50.01.29£423.00   £289.00  (7)

Lewmar - Ocean Hatch

Lewmar - Ocean Hatch Part No. 39610070From:  £269.95  (2)

Lewmar - Low Profile Hatch

Lewmar - Low Profile Hatch Part No. 39900030From:  £199.95  (2)

Gebo - Standard portlights (rectangular)

Gebo - Standard portlights (rectangular) Part No. 81.20.11.00From:  £169.00

ARBO - Arbokol 1000 Polysulphide Sealant

ARBO - Arbokol 1000 Polysulphide Sealant £15.95  (1)

Oceanair - SKYSHADE Hatchshades

Oceanair - SKYSHADE Hatchshades Part No. OSSH-20-WFrom:  £74.00  (1)

Sea Teach logo Sea Teach logo Sea Teach logo