Can't find the item you're searching for?
*
Just ask:
Please be aware this form is not linked to the page you are currently viewing.
*
Contact email:

Recently Viewed

Rule - LoPro submersible bilge pump

The new Rule LoPro bilge pump brings Rule pumping power to tight spaces.

Comes with connections for 19mm (3/4"), 25mm (1") or 28mm (1 1/8") bore hose.

2 versions available, LP900D non-automatic and LP900S automatic.

Price:  £42.95(Inc. VAT @ 20%)
+
LoPro model:  

Article Number:  LP900D

Rule


Dimensions: 193mm long, 59mm diameter (LP900D) - 237mm long, 59mm diameter (LP900S)

Current Draw: 4(amps)

Fuse Size: 7.5 amp

Output: Up to 56 litres/minute (12.5 gallons/minute) Max. recommended discharge head 3m

Features

  • Fully rotating discharge body for installation flexibility
  • Choice of discharge ports supplied with each pump
  • Ignition protected
  • Horizontal or Vertical Mounting
  • Packaged Dimensions: L:30.00 x H:10.00 x W:21.00cm
  • Actual Weight: 0.70 Kg (Approx. 0.95 Kg packed)

For automatic operation use Rule Float Switches with the LP900D.

LP900S 3 Operation Modes:

  • High water mode; The pump starts when the water level reaches 50mm (2")
  • Low water mode; Turn the motor cartridge 180º and the sensor is at 33mm (1.3")
  • Full Electronic mode; The pump automatically turns on every 2.5 minutes to check for water, if water is detected the pump runs until the water is gone.

Be the first to Write a Review for this item!

Sea Teach logo Sea Teach logo Sea Teach logo