Can't find the item you're searching for?
*
Just ask:
Please be aware this form is not linked to the page you are currently viewing.
*
Contact email:

Recently Viewed

TruDesign - Composite Skin Fittings with Tails

The Skin Fitting with Tail body and nut are moulded from glass-reinforced nylon composite. High strength, high-modulus glass fibres within the nylon composite provide dramatic strength, stiffness, toughness and dimensional stability. These properties allow a significant weight reduction over metallic fittings. TruDesign Skin Fittings with Tails eliminate the corrosion and electrical bonding problems associated with metallic fittings.

All Skin Fittings are supplied with a nylon washer to increase locknut support on the hull.

Price:  £5.70(Inc. VAT @ 20%)
+
Skin fitting:  

Article Number:  90426

TruDesign


TruDesign Skin Fittings with Tails are certified by the International Marine Certification Institute (IMCI) & Bureau Veritas to meet; ISO 9093-2 Small craft — Seacocks and through-hull fittings — Part 2: Non-metallic

For below waterline applications, see the Skin Fittings Threaded product range (as a Ball Valve must be directly attached to the Skin Fitting for safety and compliance to marine standards).

Frequently asked questions

  • Can I fit a Skin Fitting with Tail below the waterline?
    NO All Skin Fittings fitted below the waterline must be threaded and connected directly to a Ball Valve to enable shut off in event of an emergency. Additionally, 2 stainless steel hose clips should be used on every tail fitting and periodically checked for tightness as they may loosen off as the hose ages.
  • Manufactured from a glass-reinforced nylon composite - High strength and light weight
  • Compatible with all hull types - Can be used on aluminium, steel, wood or GRP hulls
  • Immune to corrosion and electrolysis - Long life with no concerns over decreased performance due to corrosion
  • Chemical resistant - Impervious to diesel, petrol and antifouling paints
  • UV resistant - Will not degrade or discolour with ultraviolet light from the sun
  • High quality surface finish - Will not discolour with green film as similar bronze fittings do
  • Long Tail - Hoses can be secured with 2 hose clamps for a strong connection

Hull Compatibility

The Tru-Design Skin Fittings with Tail are suitable for installation in all types of hull construction; steel, aluminium, fibreglass - cored and solid, wooden sandwich.

Tru-Design Skin Fittings with Tail are also able to be used on caulked solid wood hulls – care should be taken to only locate the skin fitting in the centre of any individual plank.

Flow Diameter and Hull Thickness

Tail Size Minimum I.D. Max Hull Thickness
13mm 8mm 30mm
19mm 12mm 30mm
25mm 18mm 30mm
32mm 24mm 30mm
38mm 29mm 30mm
50mm 41mm 45mm

 

 

 

 

 

 

 

Dimensions

All dimensions in mm

 

Full product data sheet from TruDesign

Be the first to Write a Review for this item!

Sea Teach logo Sea Teach logo Sea Teach logo